| Your Daily Source for Apache News and Information |
 
|
| Breaking News | Preferences | Contribute | Triggers | Link Us | Search | About |
(Dec 16th, 01:24:20 )
By Stas Bekman
In this article we will talk about tools that we need to get armed with before we can start working on the performance of our service.
Essential Tools
In order to improve performance we need measurement tools. The main tool categories are benchmarking and code profiling.
It's important to understand that in a major number of the benchmarking tests that we will execute we will not look at the absolute result numbers but the relation between the two and more result sets. The purpose of the benchmarks is to try to show which coding approach is preferable. You shouldn't try to compare the absolute results presented in the articles with those that you get while running the same benchmarks on your machine, since you won't have the exact hardware and software setup anyway. This kind of comparison would be misleading. If you compare the relative results from the tests running on your machine, you will do the right thing.
Benchmarking Applications
How much faster is mod_perl than mod_cgi (aka plain perl/CGI)? There are many ways to benchmark the two. I'll present a few examples and numbers below. Check out the benchmark directory of the mod_perl distribution for more examples.
If you are going to write your own benchmarking utility, use the Benchmark module for heavy scripts and the Time::HiRes module for very fast scripts (faster than 1 sec) where you will need better time precision.
There is no need to write a special benchmark though. If you want to impress your boss or colleagues, just take some heavy CGI script you have (e.g. a script that crunches some data and prints the results to STDOUT), open two xterms and call the same script in mod_perl mode in one xterm and in mod_cgi mode in the other. You can use lwp-get from the LWP package to emulate the browser. The benchmark directory of the mod_perl distribution includes such an example.
Benchmarking Perl Code
If you are going to write your own benchmarking utility, use the Benchmark module and the Time::HiRes module where you need better time precision (<10msec).
An example of the Benchmark.pm module usage:
benchmark.pl ------------ use Benchmark;
timethis (1_000,
sub {
my $x = 100;
my $y = log ($x ** 100) for (0..10000);
});
% perl benchmark.pl timethis 1000: 25 wallclock secs (24.93 usr + 0.00 sys = 24.93 CPU)
If you want to get the benchmark results in micro-seconds you will have to use the Time::HiRes module, its usage is similar to Benchmark's.
use Time::HiRes qw(gettimeofday tv_interval); my $start_time = [ gettimeofday ]; sub_that_takes_a_teeny_bit_of_time(); my $end_time = [ gettimeofday ]; my $elapsed = tv_interval($start_time,$end_time); print "The sub took $elapsed seconds."
Benchmarking a Graphic Hits Counter with Persistent DB Connections
Here are the numbers from Michael Parker's mod_perl presentation at the Perl Conference (Aug, 98). The script is a standard hits counter, but it logs the counts into a mysql relational DataBase:
Benchmark: timing 100 iterations of cgi, perl... [rate 1:28]
cgi: 56 secs ( 0.33 usr 0.28 sys = 0.61 cpu)
perl: 2 secs ( 0.31 usr 0.27 sys = 0.58 cpu)
Benchmark: timing 1000 iterations of cgi,perl... [rate 1:21]
cgi: 567 secs ( 3.27 usr 2.83 sys = 6.10 cpu)
perl: 26 secs ( 3.11 usr 2.53 sys = 5.64 cpu)
Benchmark: timing 10000 iterations of cgi, perl [rate 1:21]
cgi: 6494 secs (34.87 usr 26.68 sys = 61.55 cpu)
perl: 299 secs (32.51 usr 23.98 sys = 56.49 cpu)
We don't know what server configurations were used for these tests, but I guess the numbers speak for themselves.
The source code of the script was available online, but not any more :( But you can reproduce the same performance speedup, with pretty much any CGI script written in Perl.
Benchmarking Response Times with ApacheBench
ApacheBench (ab) is a tool for benchmarking your Apache HTTP server. It is designed to give you an idea of the performance that your current Apache installation can give. In particular, it shows you how many requests per second your Apache server is capable of serving. The ab tool comes bundled with the Apache source distribution.
Let's try it. We will simulate 10 users concurrently requesting a very light script at www.example.com/perl/test.pl. Each simulated user makes 10 requests.
% ./ab -n 100 -c 10 www.example.com/perl/test.pl
The results are:
Document Path: /perl/test.pl Document Length: 319 bytes
Concurrency Level: 10 Time taken for tests: 0.715 seconds Complete requests: 100 Failed requests: 0 Total transferred: 60700 bytes HTML transferred: 31900 bytes Requests per second: 139.86 Transfer rate: 84.90 kb/s received
Connection Times (ms)
min avg max
Connect: 0 0 3
Processing: 13 67 71
Total: 13 67 74
We can see that under load of ten concurrent users our server is capable of processing 140 requests per second. Of course this benchmark is correct only when the script under test is used. We can also learn about the average processing time, which in this case was 67 milli-seconds. Other numbers reported by ab may or may not be of interest to you.
For example if we believe that the script perl/test.pl is not efficient we will try to improve it and run the benchmark again, to see whether we have any improve in performance.
Benchmarking Response Times with httperf
httperf is a utility written by David Mosberger. Just like ApacheBench, it measures the performance of the webserver.
A sample command line is shown below:
httperf --server hostname --port 80 --uri /test.html \ --rate 150 --num-conn 27000 --num-call 1 --timeout 5
This command causes httperf to use the web server on the host with IP name hostname, running at port 80. The web page being retrieved is /test.html and, in this simple test, the same page is retrieved repeatedly. The rate at which requests are issued is 150 per second. The test involves initiating a total of 27,000 TCP connections and on each connection one HTTP call is performed. A call consists of sending a request and receiving a reply.
The timeout option defines the number of seconds that the client is willing to wait to hear back from the server. If this timeout expires, the tool considers the corresponding call to have failed. Note that with a total of 27,000 connections and a rate of 150 per second, the total test duration will be approximately 180 seconds (27,000/150), independently of what load the server can actually sustain. Here is a result that one might get:
Total: connections 27000 requests 26701 replies 26701 test-duration 179.996 s
Connection rate: 150.0 conn/s (6.7 ms/conn, <=47 concurrent connections)
Connection time [ms]: min 1.1 avg 5.0 max 315.0 median 2.5 stddev 13.0
Connection time [ms]: connect 0.3
Request rate: 148.3 req/s (6.7 ms/req)
Request size [B]: 72.0
Reply rate [replies/s]: min 139.8 avg 148.3 max 150.3 stddev 2.7 (36 samples)
Reply time [ms]: response 4.6 transfer 0.0
Reply size [B]: header 222.0 content 1024.0 footer 0.0 (total 1246.0)
Reply status: 1xx=0 2xx=26701 3xx=0 4xx=0 5xx=0
CPU time [s]: user 55.31 system 124.41 (user 30.7% system 69.1% total 99.8%)
Net I/O: 190.9 KB/s (1.6*10^6 bps)
Errors: total 299 client-timo 299 socket-timo 0 connrefused 0 connreset 0
Errors: fd-unavail 0 addrunavail 0 ftab-full 0 other 0
Benchmarking Response Times with http_load
http_load is yet another utility that does webserver load testing. It can simulate 33.6 modem connection (-throttle) and allows you to provide a file with a list of URLs, which we be fetched randomly. You can specify how many parallel connections to run using the -parallel N option, or you can specify the number of requests to generate per second with -rate N option. Finally you can tell the utility when to stop by specifying either the test time length (-seconds N) or the total number of fetches (-fetches N).
A sample run with the file urls including:
http://www.example.com/foo/ http://www.example.com/bar/
We ask to generate three requests per second and run for only two seconds. Here is the generated output:
% ./http_load -rate 3 -seconds 2 urls http://www.example.com/foo/: check-connect SUCCEEDED, ignoring http://www.example.com/bar/: check-connect SUCCEEDED, ignoring http://www.example.com/bar/: check-connect SUCCEEDED, ignoring http://www.example.com/bar/: check-connect SUCCEEDED, ignoring http://www.example.com/foo/: check-connect SUCCEEDED, ignoring 5 fetches, 3 max parallel, 96870 bytes, in 2.00258 seconds 19374 mean bytes/connection 2.49678 fetches/sec, 48372.7 bytes/sec msecs/connect: 1.805 mean, 5.24 max, 0.79 min msecs/first-response: 291.289 mean, 560.338 max, 34.349 min
So you can see that it has reported 2.5 requests per second. Of course for the real test you will want to load the server heavily and run the test for a longer time to get more reliable results.
Note that when you provide a file with a list of URLs make sure that you don't have empty lines in it. If you do -- the utility won't work complaining:
./http_load: unknown protocol -
Benchmarking Response Times with the crashme Script
This is another crashme suite originally written by Michael Schilli (and was located at http://www.linux-magazin.de site, but now the link has gone). I made a few modifications, mostly adding my() operators. I also allowed it to accept more than one url to test, since sometimes you want to test more than one script.
The tool provides the same results as ab above but it also allows you to set the timeout value, so requests will fail if not served within the time out period. You also get values for Latency (seconds per request) and Throughput (requests per second). It can do a complete simulation of your favorite Netscape browser :) and give you a better picture.
I have noticed while running these two benchmarking suites, that ab gave me results from two and a half to three times better. Both suites were run on the same machine, with the same load and the same parameters, but the implementations were different.
Sample output:
URL(s): http://www.example.com/perl/access/access.cgi Total Requests: 100 Parallel Agents: 10 Succeeded: 100 (100.00%) Errors: NONE Total Time: 9.39 secs Throughput: 10.65 Requests/sec Latency: 0.85 secs/Request
And the code:
#!/usr/bin/perl -w
use LWP::Parallel::UserAgent; use Time::HiRes qw(gettimeofday tv_interval); use strict;
### # Configuration ###
my $nof_parallel_connections = 10;
my $nof_requests_total = 100;
my $timeout = 10;
my @urls = (
'http://www.example.com/perl/faq_manager/faq_manager.pl',
'http://www.example.com/perl/access/access.cgi',
);
################################################## # Derived Class for latency timing ##################################################
package MyParallelAgent; @MyParallelAgent::ISA = qw(LWP::Parallel::UserAgent); use strict;
###
# Is called when connection is opened
###
sub on_connect {
my ($self, $request, $response, $entry) = @_;
$self->{__start_times}->{$entry} = [Time::HiRes::gettimeofday];
}
###
# Are called when connection is closed
###
sub on_return {
my ($self, $request, $response, $entry) = @_;
my $start = $self->{__start_times}->{$entry};
$self->{__latency_total} += Time::HiRes::tv_interval($start);
}
sub on_failure {
on_return(@_); # Same procedure
}
###
# Access function for new instance var
###
sub get_latency_total {
return shift->{__latency_total};
}
##################################################
package main;
##################################################
###
# Init parallel user agent
###
my $ua = MyParallelAgent->new();
$ua->agent("pounder/1.0");
$ua->max_req($nof_parallel_connections);
$ua->redirect(0); # No redirects
###
# Register all requests
###
foreach (1..$nof_requests_total) {
foreach my $url (@urls) {
my $request = HTTP::Request->new('GET', $url);
$ua->register($request);
}
}
### # Launch processes and check time ### my $start_time = [gettimeofday]; my $results = $ua->wait($timeout); my $total_time = tv_interval($start_time);
### # Requests all done, check results ###
my $succeeded = 0; my %errors = ();
foreach my $entry (values %$results) {
my $response = $entry->response();
if($response->is_success()) {
$succeeded++; # Another satisfied customer
} else {
# Error, save the message
$response->message("TIMEOUT") unless $response->code();
$errors{$response->message}++;
}
}
###
# Format errors if any from %errors
###
my $errors = join(',', map "$_ ($errors{$_})", keys %errors);
$errors = "NONE" unless $errors;
### # Format results ###
#@urls = map {($_,".")} @urls;
my @P = (
"URL(s)" => join("\n\t\t ", @urls),
"Total Requests" => "$nof_requests_total",
"Parallel Agents" => $nof_parallel_connections,
"Succeeded" => sprintf("$succeeded (%.2f%%)\n",
$succeeded * 100 / $nof_requests_total),
"Errors" => $errors,
"Total Time" => sprintf("%.2f secs\n", $total_time),
"Throughput" => sprintf("%.2f Requests/sec\n",
$nof_requests_total / $total_time),
"Latency" => sprintf("%.2f secs/Request",
($ua->get_latency_total() || 0) /
$nof_requests_total),
);
my ($left, $right); ### # Print out statistics ### format STDOUT = @<<<<<<<<<<<<<<< @* "$left:", $right .
while(($left, $right) = splice(@P, 0, 2)) {
write;
}
Benchmarking PerlHandlers
The Apache::Timeit module does PerlHandler Benchmarking. With the help of this module you can log the time taken to process the request, just like you'd use the Benchmark module to benchmark a regular Perl script. Of course you can extend this module to perform more advanced processing like putting the results into a database for a later processing. But all it takes is adding this configuration directive inside httpd.conf:
PerlFixupHandler Apache::Timeit
Since scripts running under Apache::Registry are running inside the PerlHandler these are benchmarked as well.
An example of the lines which show up in the error_log file:
timing request for /perl/setupenvoff.pl:
0 wallclock secs ( 0.04 usr + 0.01 sys = 0.05 CPU)
timing request for /perl/setupenvoff.pl:
0 wallclock secs ( 0.03 usr + 0.00 sys = 0.03 CPU)
The Apache::Timeit package is a part of the Apache-Perl-contrib files collection available from CPAN.
References
- The mod_perl site's URL: http://perl.apache.org
- httperf -- webserver Benchmarking tool http://www.hpl.hp.com/personal/David_Mosberger/httperf.html
- http_load -- another webserver Benchmarking tool http://www.acme.com/software/http_load/
- Apache-Perl-contrib package http://perl.apache.org/dist/contrib/
Time::HiReshttp://search.cpan.org/search?dist=Time-HiRes andBenchmarkis a part of the Core PerlLWP(libwww-perl) http://search.cpan.org/search?dist=libwww-perl
Related Stories:
ANNOUNCE: mod_perl Guide ver. 1.27(Dec 08, 2000)
Improving mod_perl Driven Site's Performance -- Part I: Choosing Operating System and Hardware(Dec 07, 2000)
Finding a mod_perl Provider or Becoming One(Nov 27, 2000)
DevShed: CGI.pm Basics(Nov 22, 2000)
The Perl You Need to Know: Personalization Methods Part 2(Oct 27, 2000)
DevShed: How To Build the Apache of Your Dreams(Sep 22, 2000)
Getting Started with mod_perl in 30 Minutes(Jun 23, 2000)
Total Modern Mod_perl(Jun 07, 2000)
Printed from Apache Today (https://apachetoday.com).
https://apachetoday.com//news_story.php3?ltsn=2000-12-16-001-06-NW-LF-PL
| About Triggers | Media Kit | Security | Triggers | Login |
|
All times are recorded in UTC. Linux is a trademark of Linus Torvalds. Powered by Linux 2.4, Apache 1.3, and PHP 4 Legal Notices, Licensing, Reprints, & Permissions, Privacy Policy. 
|